Technical
View and download data sheets for our most used products:
MAPEI
ULTRAPLAN RENOVATION SCREED 3240
A fibre reinforced self levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications, it can be hand or pump applied.
PRIMER G
Synthetic resin-based water-dispersion primer with very low volatile organic compound (VOC) for treating cementitious or gypsum surfaces prior to installing ceramic tiles
ECO PRIM GRIP
Multi-purpose, ready-to-use bond promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and adhesives for ceramic tiles
WEBER
4310
A fibre reinforced self-smoothing base & renovation screed for use in domestic & commercial areas it can be hand or pump applied.
4716
Water-borne dispersion primer for use with all cementitious and hemi-hydrate floor screeds.
SCHLUTER
DITRA 25
Schlüter®-DITRA 25 is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuation and an anchoring fleece laminated to its underside. Designed for tile and natural stone installations, Schlüter®-DITRA 25 serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate construction moisture occurring within the substrate and an uncoupling layer for problematic substrates.
DITRA HEAT
Schlüter-DITRA-HEAT is a polypropylene membrane with a cut-back stud structure and an anchoring fleece laminated on the underside. It is a universal substrate for tile coverings, which serves as an uncoupling, crack bridging, waterproofing, vapour pressure equalisation layer and is designed for the attachment of heating cables.
KERDI / KERDI KEBA
Schlüter-KERDI is a crack bridging waterproof membrane made of soft polyethylene, which has been covered on both sides with a special fleece webbing to anchor the membrane in suitable tile adhesive.
KERDI FIX
Schlüter®-KERDI-FIX is an elastic installation adhesive made of an MS polymer. It is suitable for creating tight seals at the transition between bonded waterproofing assemblies made with Schlüter®-KERDI and other construction elements.
KERDI COLL
Schlüter®-KERDI-COLL-L is a two component sealant adhesive based on a solvent free acrylate dispersion and a reactive cementitious powder. They are suitable for adhering and sealing overlaps of Schlüter®-KERDI membranes.
NU - HEAT
LO PRO MAX
LoPro Max is a retrofit wet underfloor heating system which can be laid over new and existing floors. It consists of a castellated panel designed to securely hold 10mm Fastflo floor heating tube in place which is covered with a specialist self-levelling compound.
NEO STAT GUIDE
A guide to one of the most popular room thermostat used in congestion with Nu-Heats Lo Pro Max